NetBSD / Parallella 2

本日はまずヒートシンクにファンを取り付けてみた
けど用意したものが12Vの静音仕様のものだったのでこれを5Vで回しても弱々しくてまったくの役立たず
そのうち5Vのファン買ってこないと

で、本日の進捗は 2nd CPU を起してみたといったところ
認識はしております

昨日まで動いていなかった USB の ULPI がなぜか動き出して、 USB Host も動いているようです
umass 認識しているんですが、その先は何故か固まってしまいます
要調査

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.2 (ZEDBOARD) #12: Tue Dec  9 03:31:36 UTC 2014
        
total memory = 512 MB
avail memory = 501 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/evbarm/7.99.2/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 1333 MHz Cortex-A9 r4p0 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x11142, [5]=0
cpu0: mmfr: [0]=0x100103 [1]=0x20000000 [2]=0x1230000 [3]=0x102111
cpu0: pfr: [0]=0x1231 [1]=0x11
cpu0: 32KB/32B 4-way L1 VIPT Instruction cache
cpu0: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 512KB/32B 8-way write-back-locking-D L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
vfp0: mvfr: [0]=0x10110222 [1]=0x1111111
cpu1 at mainbus0 core 1
armperiph0 at mainbus0
arml2cc0 at armperiph0: ARM PL310 r3p2 L2 Cache Controller (disabled)
arml2cc0: cache enabled
armgic0 at armperiph0: Generic Interrupt Controller, 96 sources (85 valid)
armgic0: 32 Priorities, 64 SPIs, 5 PPIs, 16 SGIs
a9tmr0 at armperiph0: A9 Global 64-bit Timer (666 MHz)
a9tmr0: interrupting on irq 27
axi0 at mainbus0: Advanced eXtensible Interface
zynqslcr0 at axi0 addr 0xf8000000: System Level Control Module
zynqslcr_dumpclocks
REF      :   33 MHz
ARM_PLL  : 1333 MHz
DDR_PLL  : 1600 MHz
IO_PLL   : 1000 MHz
CPU_6X4X :  667 MHz
CPU_3X2X :  333 MHz
CPU_2X   :  222 MHz
CPU_1X   :  111 MHz
DDR_3X   :  400 MHz
DDR_2X   :  267 MHz
DDR_DCI  :   10 MHz
SMC      :   17 MHz
QSPI     :  143 MHz
GIGE0    :  125 MHz
GIGE1    :   17 MHz
SDIO     :   50 MHz
UART     :   50 MHz
SPI      :   16 MHz
CAN      :    8 MHz
PCAP     :  200 MHz
DBG      :   67 MHz
FCLK0    :  100 MHz
FCLK1    :  200 MHz
FCLK2    :  200 MHz
FCLK3    :   40 MHz
ehci0 at axi0 addr 0xe0002000 intr 53
ehci0: Zynq USB Controller id=5 revision=2 version=2
ehci0: HCI revision=0x100
ehci0: 1 host port, device capable, 12 endpoints
ehci0: ULPI phy VID 0x0424 PID 0x0007
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
sdhc0 at axi0 addr 0xe0100000 intr 56: SD/MMC host controller
sdhc0: SD Host Specification 1.0, rev.0
sdhc0: software reset reg=00000001
sdhc0: base clock frequency 33 MHz
sdhc0: max block length 512 bytes
sdmmc0 at sdhc0 slot 0
zynquart0 at axi0 addr 0xe0000000 intr 59
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "a9tmr0" frequency 666666666 Hz quality 500
cpu_boot_secondary_processors: writing mbox with 0x2
cpu_hatch(cpu1):  vectors vbar=0x8044a280 stacks tlbcpu1: 1333 MHz Cortex-A9 r4p0 (Cortex V7A core)
cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu1: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x11142, [5]=0
cpu1: mmfr: [0]=0x100103 [1]=0x20000000 [2]=0x1230000 [3]=0x102111
cpu1: pfr: [0]=0x1231 [1]=0x11
cpu1: 32KB/32B 4-way L1 VIPT Instruction cache
cpu1: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
cpu1: 512KB/32B 8-way write-back-locking-D L2 PIPT Unified cache
 vfpvfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
vfp1: mvfr: [0]=0x10110222 [1]=0x1111111
 interrupts md(0x8047d5a0) done!
uhub0 at usb0: Xilinx EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `au8522'
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `iic'
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Generic USB Storage, rev 2.00/2.50, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0:  disk removable
sd0: fabricating a geometry
sd0: 3781 MB, 3781 cyl, 64 head, 32 sec, 512 bytes/sect x 7744512 sectors
sd0: fabricating a geometry
boot device: <unknown>
root device: sd0
dump device (default sd0b):
file system (default generic): ffs
root on sd0a dumps on sd0b
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init):
init: copying out path `/sbin/init' 11